Rugged-ridge 3-Inch Double Tube Front Winch Bumper, 07-14 Jeep Bedienungsanleitung PDF herunterladen

11561.11

Jeep

® JK Wrangler Tube Front Bumper with Winch Plate

Contents:

1. Tube Bumper (1)

2. Winch Plate (1)

3. Nut Plate (2)

4. M10 Washer (2)

5. M10 Bolt (2)

6. M12 Lock Nut (8)

7. M12 Washer (8)

8. M3 Lock Nut (8)

1. Disconnect fog lights. Remove 4 nuts per frame horn that hold the original front bumper to the vehicle.

Remove original bumper.

2. Install the original fog lights into the Center Section from the back (Figure 2a). Use the (8) M3 lock

nuts to secure them (Figure 2b).

Page 1 of 3

Figure 2bFigure 2a

1 2 3

11561.11Jeep® JK Wrangler Tube Front Bumper with Winch PlateContents:1. Tube Bumper (1)2. Winch Plate (1)3. Nut Plate (2)4. M10 Washer (2)5. M10

3. Remove the grille from the Jeep®. This is done by removing the 6 plastic fasteners from across the top of the grille, removing the blinker b

3. Tighten all hardware. Reconnect Fog Lights. Installation of the Bumper is now complete!Page 3 of 3Rugged Ridge Off Road (the Company) warrants t

Keine Kommentare

Rugged-ridge 3-Inch Double Tube Front Winch Bumper, 07-14 Jeep Bedienungsanleitung