Rugged-ridge Reusable Air Filter, 97-06 Jeep Wrangler (TJ) Bedienungsanleitung PDF herunterladen

RUGGED RIDGE SYNTHETIC AIR FILTER CLEANING INSTRUCTIONS

Step 1. Remove your re-usable air lter from your factory air box or Rugged Ridge air

intake system. The factory air box and or area around the lter will need to

be cleaned also.

Step 2. Lightly shake or tap the lter to remove large debris and excess dirt. A soft

bristle paint brush may be needed to dislodge debris from the pleats in the

lter.

Step 3. Clean lter with dish soap or a mild degreaser spray and water. Allow cleaner

to soak in to penetrate dirt and debris. Do not allow cleaner to dry on lter.

No more than 5 to 10 minutes.

Step 4. Thoroughly rinse lter with clean water. Do not use high pressure water to

rinse. Allow air lter to air dry completely. For best results place air lter in

open sunlight. Once the lter is completely dry re-install in your vehicle.

NOTICE ! Do not use compressed air or high pressure water to clean lter. Do not expose lter to open

heat or ame to dry. Excessive force will damage the lter. Oil is not needed for lter.

REV 09/22

For Technical Assistance Contact: Phone: 1-800-449-6649

OMIX-ADA Tech Support Email: techsupport@omix-ada.com

Web: www.Omix-Ada.com

RUGGED RIDGE SYNTHETIC AIR FILTER CLEANING INSTRUCTIONSStep 1. Remove your re-usable air lter from your factory air box or Rugged Ridge air

Keine Kommentare

Rugged-ridge Reusable Air Filter, 97-06 Jeep Wrangler (TJ) Bedienungsanleitung