Rugged-ridge XHD Sailcloth Replacement Top, Black, 07-09 Jeep W Bedienungsanleitung PDF herunterladen

2DR JK SOFT TOP INSTALLATION INSTRUCTIONS 07-09

Step 1. Remove the quarter windows and rear window. Remove the tailgate bar

from the rear window. The tailgate bar will be reused with the new top.

Release the plastic window strips that retain the top above the front doors.

Release the windshield latches on the front header. Do not fold the top back

at this time.

PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE YOU BEGIN.

Step 2. Release the rear corners of the top. Pull down and out on the rear corners

to remove the fabric from the belt rail. Repeat this procedures for both sides.

Step 3. Remove both sets of (4) Phillips head screws on the rear bow using a (#2)

Phillips head screwdriver. Do not use power tools. Set the screws aside as

they will be used to attach the new top.

Step 4. Unfasten the hook and loop retainer that secures the top to the bow located

above the roll bar. It may be necessary to lower the top at this time to aid

in the removal.

13736.35

Rev. 4/11

Page 1 of 3

Kit Contents:

1. Soft top fabric skin

2. Rear quarter windows (2)

3. Rear window

Tools required:

1. Phillips head screwdriver

2. Safety goggles

3. Tape

Note: For ease of installation temperature must be above 72 deg Fahrenheit. Safety

goggles should be worn when handling old deteriorated fabric.

13736.36

13736.01

1 2 3

2DR JK SOFT TOP INSTALLATION INSTRUCTIONS 07-09Step 1. Remove the quarter windows and rear window. Remove the tailgate bar from the

Seite 2

2DR JK SOFT TOP INSTALLATION INSTRUCTIONS13736.35Rev. 4/11Page 2 of 3 SBStep 5. Lower the soft top and bow assembly. With the top collapsed on the r

Seite 3

2DR JK SOFT TOP INSTALLATION INSTRUCTIONS13736.35Rev. 4/11Page 3 of 3 SBStep 10. Re-attach the hook and loop retainer around the front bow that is ab

Keine Kommentare

Rugged-ridge XHD Sailcloth Replacement Top, Black, 07-09 Jeep W Bedienungsanleitung